General repairs price list

Standing minimum labour charge – from £5.00  

  Our standing minimum labour charge is for any job that is not in our general repairs list that takes us time and/or specialist tools to do. This may be in addition to a job that is listed.

  There are things we wont charge for, such as small jobs like adjusting angle of your seat or handlebars, swapping pedals etc.

Inner tube replacement – £5.00
 The price is for replacing the inner tube and or tyre on a standard non hub geared bike. We will check for the cause of the puncture if applicable, check the condition of the rim and the tyre.

Fit front or rear rack – £8

Fit Full length mudguard – £8

Fit drop bar tape – £8

Bottom bracket service/fitting – £20
 Strip out old unit, check threads and facing, clean, re-grease and install new bb or bearings.

Tap and face BB shell on bare frame – £10

Headset service/fitting/fork fitting – £20                    Strip out old unit, check cups and facing, clean , re-grease and install new headset/fork/bearings.

Removal of BB or Headset for painting - £10

Removal of Seized/rusted parts - from £15         Sometimes parts such as stems, seat-posts and bottom brackets are seized/rusted in the frame. When this is the case additional labour/time and sometimes specialist tools are needed to remove the item. 

 

 

 

 

Install/Replace 1 x Derailleur or Gear cable and gear set-up – £15

Install/Replace 2 x Derailleur or Gear cable and gear set-up – £30

Install/replace 1 x Gear shifter – £15

Install/replace 2 x Gear shifter – £30

Straighten or install rear mech hanger and gear set-up – £15

Install road STI levers and set up– £40

Fit 1 x new brake pads or cable – £8

Fit 2 x new brake pads or cable – £15

Install new Chain/sprockets and gear set-up - £20

Install new Chain/sprocket single speed - £10

Complete de-grease of drive train and set up – £30

Replace 1 x spoke and true wheel - from £16                 The wheel is removed from your bike, tyre and tube removed, cassette/freewheel removed, spoke replaced, all spokes checked and the wheel trued. Additional spokes £1. Our standard spokes are Sapim.

True wheel – From £10

Hub cone adjustment – From £5

Hub service – From £15
 This involves stripping the hub of old bearings and replacing them with new ones.

Hydraulic brake bleed – from £15 per brake

 

 

All our mechanics are Cytech qualified and have many years of experience servicing all types of bicycle. Please get in touch if you have any questions.