Full Bike Services

We offer three full bike services (see below) as well as individual repairs (price list button below). We aim to complete all services the same day. If you would like a service, please get in touch or just pop in to either shop.

Peckham

261 Rye Lane, Peckham, SE15 4UR

Tel: 020 7635 7005
hello@seabasscycles.co.uk

Camberwell

62 Camberwell Church Street, SE5 8QZ

T: 020 7703 3470
hello@seabasscycles.co.uk

AMAT-0161-0039.jpg

Lightweight Service
From £40

  • Inspection of all parts for wear and safe operation.

  • Tuning and adjustment of gears.

  • Tuning and adjustment of brakes.

  • Checking and adjustment of headset and wheel bearings.

  • Checking bottom bracket bearings and chainset.

  • Checking, lubricating or replacing cables.

  • Fitting of minor replacement parts i.e cables, brake pads.

  • Inflation of tyres to correct pressure.

Recommended every 6/12 months depending on use
 

Medium Weight Service
From £60

  • Inspection of all parts for wear and safe operation.

  • Checking and adjustment of headset, wheel and bottom bracket bearings.

  • Wheels removed from frame, cleaned and trued if necessary.

  • Clean of complete bicycle.

  • Removal and degrease/cleaning of complete drive chain including derailleurs.

  • Re-fitting, re-setting and re-lubrication of drive chain including derailleurs.

  • Tuning and adjustment of brakes.

  • Checking, lubricating or replacing cables.

  • Fitting of minor replacement parts i.e: cables, brake pads.

  • Fitting of any standard service items ie: chain, cassette, tyres.

Recommended every 6/12 months depending on use

 

 

Heavyweight Service
From £120

  • Inspection of all parts for wear and safe operation.

  • Stripping bike of all parts back to bare frame.

  • Cleaning of frame and parts.

  • Cleaning and truing of wheels.

  • Degreasing and cleaning of all drive chain and transmission components.

  • Degreasing and cleaning of all braking components.

  • Servicing/fitting of headset bearings.

  • Servicing/fitting of bottom bracket bearings.

  • Servicing/fitting of hub bearings.

  • Removal and refitting of all bolts and fixings to correct torque.

  • Fitting of any replacement parts.

  • Re-fitting, re-setting and re-lubrication of drive chain, transmission and braking components.

  • A full set of new inner cables fitted as standard.

Recommended every 12 months depending on use.

 

Service Notice

  • Bikes requiring additional service items not included in the service will incur a discounted labour charge per item. e.g BB service discounted from £25 to £20

  • Parts not included in any of the services unless stated.

 

General Repairs

Our standing minimum labour charge is for any job that is not in our general repairs list that takes us time and/or specialist tools to do. This may be in addition to a job that is listed.

There are things we wont charge for, such as small jobs like adjusting angle of your seat or handlebars, swapping pedals etc.

Standing minimum labour charge – from £5.00

 

Puncture

  • Inner tube replacement – £5.00

The price is for replacing the inner tube and or tyre on a standard non hub geared bike. We will check for the cause of the puncture if applicable, check the condition of the rim and the tyre.


Gears

  • Install/Replace 1 x Derailleur or Gear cable and gear set-up – £15

  • Install/Replace 2 x Derailleur or Gear cable and gear set-up – £30

  • Install / replace 1 x Gear shifter – £15

  • Install / replace 2 x Gear shifter – £30

  • Straighten or install rear mech hanger and gear set-up – £15

  • Install road STI levers and set up– £40


Brakes

  • Hydraulic brake bleed – from £15 per brake

  • Fit 1 x new brake pads or cable – £8

  • Fit 2 x new brake pads or cable – £15


Drive Chain

  • Install new Chain/sprockets and gear set-up - £20

  • Install new Chain/sprocket single speed - £10

  • Complete de-grease of drive train and set up – £30

Fitting

  • Fit front or rear rack – £8

  • Fit Full length mudguard – £8

  • Fit drop bar tape – £8

  • Bottom bracket service/fitting – £20

Strip out old unit, check threads and facing, clean, re-grease and install new bb or bearings.

  • Tap and face BB shell on bare frame – £10

  • Headset service/fitting/fork fitting – £20

Strip out old unit, check cups and facing, clean , re-grease and install new headset/fork/bearings.

  • Removal of BB or Headset for painting - £10

  • Removal of Seized/rusted parts - from £15

Sometimes parts such as stems, seat-posts and bottom brackets are seized/rusted in the frame. When this is the case additional labour/time and sometimes specialist tools are needed to remove the item. 


Wheel Repairs

  • Replace 1 x spoke and true wheel - from £16

The wheel is removed from your bike, tyre and tube removed, cassette/freewheel removed, spoke replaced, all spokes checked and the wheel trued. Additional spokes £1. Our standard spokes are Sapim.

  • True wheel – From £10

  • Hub cone adjustment – From £5

  • Hub service – From £15

This involves stripping the hub of old bearings and replacing them with new ones.


All our mechanics are Cytech qualified and have many years of experience servicing all types of bicycle.
Please get in touch if you have any questions.